Replacing Electrical Sockets And Light Fittings

You don't want to mess around with electricity when installing lights in your home. Before starting any electrical work, make sure the circuit breaker has been switched off to prevent electricity from flowing through the house.

This is a great safety precaution that everyone should be aware of when working with electricity. Adding or replacing lamps is a simple and straightforward process when you have everything you need. If you are not sure how to install it then you can take help from Sherman Oaks electrician.

How to install lamps to add more light to any room.

Installation of lights

The first thing you need to do when installing a new lamp is to use a test lamp to make sure that no electricity is coming into the outlet. This will ensure that the outlet used during the installation will be safe for you when installing the new device.

You want to make sure there is no power so that you can safely plug in the lamp before turning it back on. Unplug the old device and unplug the cable. Leave the cable alone until you're ready to snap the new device in place.

Installation of electrical outlets for the bathroom

As with lamp installation (and other electrical work), make sure the fuse box is turned off so there is no risk of electric shock. Changing the electrical outlet in a bathroom is very similar to changing any other electrical outlet in the house, except that you are near water.

Water and electricity don't mix, so you need to make sure the circuit breaker switch (fuse box) is off. Take a test lamp and check the socket after turning off the switch to ensure that the socket is not receiving power. Once you've done that, it's time to swap out the old outlets.